Last Updated： Aggregation Period:Mar 04, 2026～Mar 31, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 225 items
Input voltage: AC 180V~250V (50Hz) Input current: 3~5mA Output voltage: DC 1: 14KV DC 2: 8KV
Model: HVLP-EV-50B Input Voltage: AC 180V~250V (50Hz) Input Current: 3~5mA Output Voltage: DC 2KV~10KV Output Power: 50W Weight: 0.3KG Material: Plastic Dimensions: 131mm*67mm*50mm
Electrostatic filter air purifier
It can be cleaned using an electrostatic filter method, and there is no need to replace the filter.
A product with a processing air volume of 50m³/min as a higher model of HG311!
The HG511 is an industrial air purifier equipped with two dust collection units measuring 470mm square. As a higher model than the HG311, it achieves an airflow rate of 50m³/min. Its applications are the same as those of the HG311, but it meets a wider range of needs. It is well-suited for cleaning the entire factory as a broad-area application. The dust collection method employs a needle discharge system. 【Specifications (partial)】 ■ Model: HG511 ■ Power supply: 3-phase AC200V (50/60Hz) ■ Power consumption: 370W (50Hz) / 500W (60Hz) ■ Airflow rate: 45m³/min (50Hz) / 55m³/min (60Hz) ■ Dust collection method: Needle discharge system *For more details, please download the PDF or feel free to contact us.
Adopts a horizontal airflow mechanism with high air circulation efficiency! Ultra-thin design with a ceiling-mounted dimension of 20cm.
The "TZ4000" is a ceiling-mounted air purifier. It draws in dirty air from the bottom of the unit and blows out clean air from two directions on the sides. Because the air can reach far, it improves the overall air circulation in the room, enhancing the purification effect. It features an ultra-thin design with a ceiling installation dimension of 20 cm, allowing it to be embedded in narrow ceiling spaces. It can accommodate areas where there is limited space for other equipment to be installed in the ceiling. 【Features】 ■ Adopts a horizontal blowing mechanism with high air circulation efficiency ■ Ultra-thin design with a ceiling installation dimension of 20 cm, suitable for narrow ceiling spaces *For more details, please download the PDF or feel free to contact us.
No assembly or construction required! You can create a clean environment just by connecting the power.
1. Compact design & space-saving Relatively lightweight (about 90kg) and equipped with casters, making it easy to move. 2. Energy-efficient design Low power consumption (330W) and energy-efficient design. Also relatively low noise (60dB) for comfort. 3. Hygienic SUS structure The main body is made of SUS structure, which prevents corrosion and paint peeling, making it ideal for use in clean rooms and food factories. 4. Changeable filter configuration Optional high-efficiency ULPA filters and relatively clog-resistant medium-performance filters can be changed. 5. Easy filter replacement Filters can be replaced without tools. The pre-filter can be simply pulled out, and the HEPA filter can be removed by just unfastening the latch. 6. Three-stage airflow adjustment available With the airflow selector, adjustments can be made for high airflow (50㎥/min), medium airflow (35㎥/min), and low airflow (20㎥/min). All can be handled by this one unit.
Equipped with two 470mm square dust collection units! We respond to a wider range of needs.
The HG511D is a factory air purifier suitable for direct connection and local applications. As a higher model than the HG311, it achieves an airflow rate of 50m³/min. It is equipped with two dust collection units measuring 470mm on each side. It can be used as a local type that directly connects to areas with high dust levels or draws in dust through hoods. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Model: HG511D ■ Power supply: 3-phase AC 200V (50/60Hz) ■ Power consumption: 370W (50Hz) / 500W (60Hz) ■ Processing airflow: 45m³/min (50Hz) / 55m³/min (60Hz) ■ Dust collection method: Needle discharge method *For more details, please download the PDF or feel free to contact us.
Adopts deep ultraviolet (UVC) LED! Compact design UV streamer air purifier.
The "ACB50X-S" is a UV Streamer air purifier with an antibacterial design that emphasizes cleanliness. In addition to Daikin's unique "Streamer" technology that addresses harmful substances such as bacteria and odors, it is equipped with "deep ultraviolet (UVC) LED" and "antibacterial HEPA filter," allowing it to effectively combat viruses and bacteria at high speed. Furthermore, it can be operated via smartphone without touching the main unit, enabling users to check air conditions and control the ON/OFF function through a dedicated app. 【Features】 ■ Utilizes deep ultraviolet (UVC) LED at 265nm ■ Antibacterial design focused on cleanliness ■ Operable via smartphone ■ Unique structure that produces clean air ■ Compact design that fits easily in any location *For more details, please refer to the PDF document or feel free to contact us.
Compact yet professional? Tabletop film production equipment.
The industry's smallest film production device has arrived! Equipped with a full-scale T-die, it is perfect for producing narrow films and tapes. An ideal machine for taking small sample quantities. 【Features】 1. Compatible with pellets 2. Compact size makes maintenance very easy 3. Height adjustable with a lift mechanism 4. Desktop-sized device for ease of use *For more details, please contact us or download the catalog.
For approximately 37m2 (about 22 tatami mats)! Commercial humidifying air purifier with a triple clean system!
The "KI-M850S-S" is a commercial humidifying air purifier that uses Plasma Cluster technology to "remove static electricity" from walls and other surfaces, thereby suppressing the adhesion of fine particles to these surfaces. With Sharp's unique "Speed Static Electricity Removal Flow," it quickly sucks in everything from bothersome dust to invisible fine particles, effectively capturing 99.97% of particles as small as 0.3µm with its "HEPA filter." Additionally, by pressing the "Speed Dust Collection" button, it can collect dust more quickly within 60 minutes. 【Features】 ■ Humidification with clean water, Ag+ ion cartridge ■ Always clean antibacterial and mold-resistant humidification filter ■ Peel off and replace disposable pre-filter ■ Easy maintenance with a convenient water tank and caster with stopper ■ Automatic operation recovery and breaker interlock function *For more details, please download the PDF or feel free to contact us.
The growing demand for air quality! Creating "good air" to support a new era.
This catalog introduces "Plasma Cluster devices" that are active in various companies and industries, including residential environments, offices, stores, and public facilities. It features models such as the "KI-M851," which is suitable for public spaces with flexible installation, the "KC-M50B," which is ideal for personal spaces, and the "IG-301JF/IG-251JF," which quickly eliminates static electricity troubles cleanly with Plasma Cluster technology. Plasma Cluster responds firmly to the growing demand for improved air quality. [Contents] ■ Plasma Cluster Air Purifiers - Floor-standing type - Wall-mounted/shelf-mounted type ■ Ionizers (Plasma Cluster ion generators specialized for static elimination) *For more details, please refer to the PDF document or feel free to contact us.
Quickly captures pollen and dust mite corpses with a dedicated two-stage filter! Powerful deodorization and disinfection with ozone air.
"Ozclean PRO" is an air purifier equipped with an ozone gas generation function, designed with consideration for use in occupied environments, targeting an indoor ozone concentration of 0.05 ppm. It captures pollen and dust mites using a dedicated two-stage filter. The full front panel intake allows for powerful and speedy removal. In addition to its compact design with a depth of approximately 13 cm, it features an adjustable volume based on the size and odor of the room. 【Features】 ■ Compact design with a depth of approximately 13 cm ■ Full front panel intake ■ Dedicated two-stage filter ■ Powerful deodorization and disinfection with ozone air ■ Adjustable volume based on room size and odor *For more details, please refer to the PDF document or feel free to contact us.
Commercial large air purifier. Utilizes centrifugal force of water to purify exhaust gases!
The industrial large air purifier "Dust Scrubber" purifies exhaust gases by utilizing the centrifugal force of water through wind pressure generated by a fan. 【Features】 ◆ Complete ventilation of the entire factory! ◆ Eco-friendly system utilizing water circulation ◆ Responsible construction from design to management Processing air volume 50m3/min to 400m3/min
A refreshing space with the power of five filters and ions.
The 'Drifting Ice Angel DX' is a high-performance active ion air purifier that features five carefully selected filters and the benefits of ions. Using 'photocatalytic' titanium dioxide, it disinfects, cleans, and deodorizes your room. Additionally, active ions inactivate viruses and bacteria. Aroma specially blended by AEAJ certified aromatherapists can also be diffused in mist form, contributing to indoor air purification through the sterilizing and antibacterial properties of essential oils. [Features] ■ Zeolite pre-filter ■ HEPA filter ■ Deodorizing activated carbon filter ■ Antibacterial iodine filter ■ Antiallergen photocatalytic vitamin C filter *For more details, please download the PDF or feel free to contact us.
You can create genuine thread! Testable with a small amount of materials. Easy to operate and can also be used as an extension device. Supports small lots that were not possible until now!
The small spinning device 'ALM-S1000/S3500' is a compact extruder (using ALM-E20) with a diameter of 20mm. 【Features】 ■ Can test with a small amount of material ■ Easy operation by one person ■ Can also be used as a stretching device ■ Supports small lots that were previously not possible 【Spinning Speed】 ■ S1000 = Max 1000m/min ■ S3500 = Max 3500m/min *For more details, please download the PDF or feel free to contact us.
Safe even with a large number of unspecified people! Air purifier equipped with titanium dioxide photocatalyst.
"Primavera" is an air purifier suitable for a 20-tatami room (up to 32.4m²). It can generate only negative ions without producing unnecessary ozone or positive ions. Additionally, we also offer the "Primavera Circle PRO," which is suitable for a 30-tatami room (up to 50m²) and is equipped with PM2.5 and gas sensors. 【Primavera Features】 ■ Nano-titania photocatalyst ■ Wall-mounted capability ■ Ionizer included ■ Dust sensor included ■ Negative ions ■ Multi-functional filter included *For more details, please refer to the PDF document or feel free to contact us.
With this one unit, you can control humidity while disinfecting, deodorizing, and collecting dust in your room!
The "KH-35" is a humidifying air purifier capable of disinfecting, deodorizing, and dust collection in your room. Water passes through a permeable membrane in the form of water vapor, humidifying the flowing air cleanly. In a 200m² room, it can achieve approximately 20% humidity in about one hour. Additionally, due to its large-capacity tank, it is energy-efficient and requires fewer water refills. 【Features】 ■ Compatible with all pollen and PM2.5 ■ Powerful humidification ■ Airflow of 780m²/h ■ Quiet operation ■ No condensation ■ Energy-saving *For more details, please refer to the PDF document or feel free to contact us.
UV-C sterilization lamp used in the "circulating air ultraviolet purification system" effectively disinfects the air within the facility using the power of ultraviolet light.
Point 1: Disinfection of airborne bacteria indoors Powerful ultraviolet light removes and disinfects viruses and bacteria within the facility. Point 2: Safe and secure design Since ultraviolet light is not directly exposed, it does not affect people or other items in the room. Point 3: Easy installation and maintenance Simply plug it into an outlet to use. Unlike filter systems, maintenance is easy.
The noise level is 40-50 dB (A)! The multi-layer filter captures pollutants!
The "QleanAir FS 70 HEPA" is an air purifier made of steel (powder-coated) that boasts a maximum airflow of 2,000 m³/h. It features stepless speed adjustment and two airflow levels. Its dimensions are 692 mm in width, 1,652 mm in height, and 580 mm in depth, with a weight of 124 kg. The collection efficiency of the product has been verified in tests to be equal to or greater than that of the main filter. 【Features】 ■ Safe and comfortable indoor air environment ■ High output with quiet operation ■ Free adjustment of airflow direction ■ HEPA 14 filter that captures viruses and bacteria ■ Easy to install and user-friendly ■ Long-term performance guarantee *For more details, please refer to the PDF materials or feel free to contact us.
Air purifier equipped with photocatalyst [Primavera Circle PRO] Let's utilize subsidies to combat the coronavirus! We will provide a quote!
Achieving stronger dust collection capabilities through the power of a high-performance filter using patented nanofine photocatalytic technology for active thorough removal. It inhales pollutants from 360° and delivers purified air in a circular manner to every corner of the room.
An air purifier with a high dust collection type, enhanced with four dust collection units of HG511D!
We would like to introduce our factory air purifier 'HG522D' that we handle. The number of dust collection units has been increased to four compared to the HG511D, achieving a high dust collection type. It is suitable for dust collection in areas with a high amount of dust for direct connection and localized applications. The airflow adjustment adopts an inverter type, and the dust collection method is a needle discharge type. 【Specifications (partial)】 ■ Model: HG522D ■ Power supply: 3-phase AC 200V (50/60Hz) ■ Power consumption: 380W ■ Processing airflow: 45m³/min (50Hz) / 55m³/min (60Hz) ■ Airflow adjustment: Yes (inverter type) ■ Dust collection method: Needle discharge type *For more details, please download the PDF or feel free to contact us.
For researchers who want to prototype various threads! Using a servo motor, it accurately extrudes the spinning liquid.
There are three main methods for fiberizing (spinning) polymer materials: melt, dry, and wet spinning. While melt spinning is the primary manufacturing method for yarn production, wet spinning using solvents and coagulation baths is required for special fibers. The "AIKI-SS01" uses a servo motor to accurately extrude the spinning solution and is also compatible with air gap spinning. 【Features】 ■ Accurately extrudes the spinning solution using a servo motor. ■ Produces a variety of yarns by replacing commercially available nozzles, from one yarn to several. *For more details, please request materials or view the PDF data available for download. *Factory tours are also possible.
Increased the number of dust collection units to 4! High dust collection type suitable for direct connection and local applications.
We would like to introduce our factory air purifier 'HG321D'. By increasing the number of dust collection units from the HG311 to four, we have achieved a high-efficiency dust collection type. It can be used as a local type that directly connects to areas with high dust levels or draws in dust through a hood. The dust collection method employs a needle discharge system. 【Specifications (partial)】 ■ Model: HG321D ■ Power Supply: AC200V (single phase) ■ Power Consumption: 260W (50Hz) / 360W (60Hz) ■ Airflow Rate: 29m³/min (50Hz) / 33m³/min (60Hz) ■ Dust Collection Method: Needle discharge system *For more details, please download the PDF or feel free to contact us.
In addition to its use as an oil mist collector directly connected to machine tools, it can also be used as a localized dust collector for fine dust!
The HG122 is an air purifier that connects to a φ150 duct for direct connection or local use. In addition to its application as an oil mist collector directly connected to machine tools, it can also be used as a local dust collector for fine particulate matter. The dust collection method employs a needle discharge system, and the installation method is a stand-alone type. 【Specifications (partial)】 ■ Model: HG122 ■ Power Supply: AC200V (single phase) ■ Power Consumption: 210W (50Hz) / 310W (60Hz) ■ Airflow Rate: 11m³/min (50Hz) / 12m³/min (60Hz) ■ Dust Collection Method: Needle discharge system *For more details, please download the PDF or feel free to contact us.
We offer a lineup of "Jiaino" and large and small humidifiers! We support the improvement of office environments.
We would like to introduce products that improve the air quality in offices, handled by Hodzumi Co., Ltd. Our lineup includes the hypochlorous acid space disinfecting and deodorizing machine "F-JDL50-W (commercial model)" and "F-MV2100 (12 tatami, 21m² model)", as well as a large humidifier "FE-KXP23 (64 tatami, 106m² model)" that can cover over 100m² with just one unit. Additionally, based on the know-how cultivated at Duskin, we have developed a rental humidifier service that includes "regular maintenance." 【Lineup (excerpt)】 < Hypochlorous Acid Space Disinfecting and Deodorizing Machines > ■ F-JDL50-W (commercial model, 40 tatami, 66m²) ■ F-MV2100 (12 tatami, 21m² model) ■ F-MV4100 (18 tatami, 32m² model) ■ F-JML30-W (24 tatami, 40m² model) *For more details, please refer to the PDF document or feel free to contact us.
A wide-area type that cleans the entire factory! We also offer a localized type that directly connects to areas with high dust levels or draws in dust through hoods.
The HG311 is a factory air purifier with a processing air volume of 30m³/min. It is equipped with two dust collection units measuring 360mm square. It offers a wide-area type that cleans the entire factory and a local type that directly connects to areas with high dust levels or draws in dust through hoods. The dust collection method employs a needle discharge system. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Model: HG311 (wide area) ■ Power supply: AC200V (single phase) ■ Power consumption: 260W (50Hz) / 370W (60Hz) ■ Processing air volume: 29m³/min (50Hz) / 33m³/min (60Hz) ■ Dust collection method: Needle discharge system ■ Installation method: Ceiling-mounted (shelf placement also available) *For more details, please download the PDF or feel free to contact us.
Floating viruses and airborne bacteria are decomposed by the power of mildly acidic electrolyzed water! The maximum applicable area is 200m² for the air purifier.
The "Pure Washer" is a completely new air purifier that cleans the air using water. It humidifies 2.7 liters per hour and breaks down airborne viruses and bacteria using the power of mildly acidic electrolyzed water. It can be used for disinfecting various places such as handrails, floors, water areas, and indoors, making it suitable for infection control and food poisoning prevention. 【Features】 - Humidifies 2.7 liters per hour - Removes odor components by adsorbing them with water mist - Breaks down airborne viruses and bacteria using the power of mildly acidic electrolyzed water - Removes impurities from the air - Maximum applicable area is 200m² - Directly connected to tap water *For more details, please refer to the PDF document or feel free to contact us.
Specialized staff conduct maintenance every two weeks! We offer a lineup including heaterless evaporative humidifiers.
At Hodzumi Co., Ltd., we offer humidifier rentals. Our lineup includes the heaterless evaporative humidifier "FE-KXP23 (64 tatami, 106 m² model)," as well as hybrid humidifiers "HD-182 (50 tatami, 80 m² model)" and "RX-918 (24 tatami, 40 m² model)." Our specialized staff will visit every two weeks to provide detailed maintenance, focusing on areas that may not receive adequate care from customers, such as filter replacement and dust removal from the intake grill. 【Maintenance content every two weeks】 ■ Filter replacement ■ Dust removal from the intake grill ■ Cleaning of the water tray ■ Wiping down the main unit *For more details, please refer to the PDF document or feel free to contact us.
Air purifier for factories equipped with two dust collection units of 360mm square, with a processing air volume of 30m³/min!
The "HG311D" is a factory air purifier suitable for direct connection and local applications. It can be used as a localized unit that directly connects to areas with high dust levels or draws in dust through a hood. Equipped with two dust collection units measuring 360mm on each side, it achieves an airflow rate of 30m³/min. The airflow adjustment adopts a non-contact, stepless method, and the installation type is ceiling-mounted (shelf placement is also possible). 【Specifications (partial)】 ■ Model: HG311D ■ Power supply: AC200V (single phase) ■ Power consumption: 260W (50Hz) / 370W (60Hz) ■ Processing airflow: 29m³/min (50Hz) / 33m³/min (60Hz) ■ Dust collection method: Needle discharge method *For more details, please download the PDF or feel free to contact us.
An air purifier with an enhanced dust collection unit increased to four units, making it a high dust collection type!
We would like to introduce our factory air purifier 'HG321'. The number of dust collection units has been increased to four, achieving a high dust collection type. It is suitable for cleaning the entire factory as a wide-area application. The dust collection method employs a needle discharge system, and the airflow adjustment is a contactless, stepless method. The installation type is ceiling-mounted (shelf placement is also possible). 【Specifications (partial)】 ■ Model: HG321 ■ Power supply: AC200V (single phase) ■ Power consumption: 260W (50Hz) / 360W (60Hz) ■ Processing airflow: 29m³/min (50Hz) / 33m³/min (60Hz) ■ Airflow adjustment: Contactless, stepless ■ Dust collection method: Needle discharge method *For more details, please download the PDF or feel free to contact us.
Because it has a 'front suction' design, it can be placed against the wall. Powerful dust collection that can combat the risks of harmful substances in the air. MADE IN JAPAN.
An air purifier that emphasizes dust collection and sterilization. With a powerful maximum airflow of 12.9 cubic meters, unique to commercial use, it effectively draws in air and captures particles with its electric dust collection unit. This air purifier sterilizes using ultraviolet light at 253.7 nm. Additionally, the hassle of washing the electric dust collector can be avoided by simply replacing it with a manufacturer-cleaned electric dust collector. There is no need to purchase chemicals. For more detailed information, please contact us.
